ADC101C021CIMK/NOPB, 1-Channel Single ADC SAR 189ksps 10-bit Serial 6-Pin TSOT-23 T/R
см. техническую документацию
Описание
The ADC101C021CIMK/NOPB is a 10-bit successive-approximation Analogue-to-digital Converter operates from a +2.7 to 5.5V supply. The low-power monolithic converter is based on successive approximation register architecture with an internal track-and-hold circuit that can handle input frequencies up to 11MHz. The ADC101C021 operates from a single supply which also serves as the reference. The device features an I²C-compatible serial interface that operates in all three speed modes, including high speed mode 3.4MHz. The ADC's Alert feature provides an interrupt that is activated when the analogue input violates a programmable upper or lower limit value. The device features an automatic conversion mode, which frees up the controller and I²C interface. In this mode, the ADC continuously monitors the analogue input for an "out-of-range" condition and provides an interrupt if the measured voltage goes out-of-range.
• Out-of-range alert function
• Automatic power-down mode while not converting
• 1µs Typical conversion time
• 188.9kSPS Maximum throughput rate
• Green product and no Sb/Br
Технические параметры
Количество Выводов | 6вывод(-ов) |
Линейка Продукции | Single 10-Bit SAR ADCs |
Максимальная Рабочая Температура | 105°C |
Максимальное Напряжение Питания | 5.5В |
Минимальная Рабочая Температура | -40°C |
Минимальное Напряжение Питания | 2.7В |
Стиль Корпуса АЦП / ЦАП | TSOT-23 |
Тип Входного Канала | Несимметричный |
Тип Напряжения Питания | Однополярный |
Уровень Чувствительности к Влажности (MSL) | MSL 1-Безлимитный |
Частота Выборки | 188.9Квыборок/с |
Resolution (Bits) | 10bit; Sampling Rate |